Faucet Repair Near Me
A dripping, leaking, loose, or difficult-to-use faucet can waste water, damage cabinets and countertops, stain fixtures, and become increasingly difficult to operate. Professional faucet repair can identify the worn or damaged component and restore dependable water flow.
Our faucet services include leaky faucet repair, kitchen faucet repair, bathroom faucet replacement, outdoor faucet repair, shower faucet repair, bathtub faucet repair, cartridge replacement, valve repair, and new faucet installation.
Homeowners and businesses searching for faucet repair near me need an experienced plumber who can determine whether the fixture needs a minor adjustment, internal replacement parts, new supply connections, or complete faucet replacement.
Professional Faucet Repair Services
Faucets contain cartridges, stems, washers, seals, O-rings, valve seats, aerators, handles, supply lines, and mounting hardware. These components can wear out, loosen, corrode, or become clogged with mineral deposits.
Popular faucet repair services include:
- Leaky faucet diagnosis and repair
- Dripping faucet repair
- Kitchen faucet repair
- Bathroom sink faucet repair
- Bathroom faucet replacement
- Bathtub faucet repair
- Shower faucet repair
- Outdoor faucet repair
- Hose bib and spigot repair
- Commercial faucet repair
- Faucet cartridge replacement
- Faucet stem replacement
- Washer and O-ring replacement
- Valve seat repair
- Faucet handle repair
- Loose faucet tightening
- Faucet aerator cleaning and replacement
- Low water pressure troubleshooting
- Touchless faucet repair
- Pull-down sprayer repair
- Side sprayer repair
- Faucet supply line replacement
- Shutoff valve repair and replacement
- New faucet installation
Plumber for a Leaky Faucet
A professional plumber for a leaky faucet can locate the exact source of the leak before replacing parts. Water may drip from the spout, seep around the handle, leak beneath the sink, or escape from a damaged supply connection.
The location of the water can help indicate which component has failed:
- Dripping from the spout: A worn cartridge, stem, washer, seal, or valve seat may be allowing water to pass through the closed faucet.
- Leaking around the handle: A damaged O-ring, packing nut, cartridge, or internal seal may be responsible.
- Water beneath the sink: The faucet body, mounting connection, supply line, drain, shutoff valve, or sprayer hose may be leaking.
- Leaking from the faucet base: Internal seals, mounting components, or the faucet body may be damaged.
- Leaking only when the faucet runs: A loose connection, cracked hose, damaged spout, or failed seal may be allowing water to escape under pressure.
Because water can travel along pipes, hoses, and cabinet surfaces, the place where water becomes visible is not always the original source of the leak.
Leaky Faucet Fix
The correct leaky faucet fix depends on the faucet design and the component causing the problem. Different faucets may use compression valves, cartridges, ceramic discs, balls, stems, or manufacturer-specific parts.
A professional repair may include:
- Shutting off the water supply
- Removing the faucet handle and trim
- Inspecting the cartridge, stem, seals, and valve seat
- Cleaning mineral deposits and debris
- Replacing worn washers, O-rings, or gaskets
- Installing a new faucet cartridge or stem
- Tightening loose mounting hardware
- Repairing or replacing damaged supply lines
- Reassembling and adjusting the faucet
- Restoring the water supply
- Testing hot and cold operation
- Checking all connections for leaks
Repairing the visible drip without checking the faucet body, supply lines, shutoff valves, and surrounding connections may allow another leak to remain undetected.
Kitchen Faucet Repair
Kitchen faucets experience frequent use and often contain additional components such as pull-down sprayers, side sprayers, swivel spouts, flexible hoses, and multiple spray settings. Wear in any of these parts can affect water flow or cause leaks around the sink cabinet.
Common kitchen faucet repair problems include:
- A faucet that drips after being turned off
- Water leaking around the handle
- A loose faucet base
- A stiff or difficult-to-move handle
- A pull-down sprayer that will not retract
- A sprayer hose that leaks under the sink
- A side sprayer with weak water flow
- A swivel spout that is difficult to move
- Water leaking from the faucet body
- Low or uneven water pressure
- A faucet that makes squealing or chattering noises
- Hot or cold water that does not operate correctly
Pull-Down and Pull-Out Faucet Repair
Pull-down and pull-out faucets use flexible hoses, spray heads, docking components, weights, and diverter mechanisms. Repair may involve replacing a leaking hose, cleaning the spray head, adjusting the hose weight, repairing the docking connection, or replacing a damaged sprayer.
Kitchen Sprayer Repair
A kitchen sprayer may leak, lose pressure, become stuck, or fail to switch between spray patterns. The cause may be a clogged spray head, cracked hose, worn diverter, damaged connection, or restricted aerator.
Loose Kitchen Faucet Repair
A loose kitchen faucet may move at the base whenever the handle or spout is used. The mounting nut, bracket, gasket, or sink surface may need attention. Continued movement can loosen supply connections and allow water to seep beneath the faucet.
Bathroom Faucet Repair
Bathroom sink faucets may develop constant drips, handle leaks, corrosion, mineral buildup, weak flow, or temperature-control problems. Repairing these issues can improve water control and help protect the vanity, countertop, flooring, and cabinet interior.
Bathroom faucet repair may include:
- Single-handle faucet repair
- Two-handle faucet repair
- Widespread faucet repair
- Centerset faucet repair
- Cartridge or stem replacement
- Handle and trim repair
- Aerator cleaning
- Drain stopper adjustment
- Supply line replacement
- Bathroom shutoff valve repair
Bathroom Faucet Replacement
Bathroom faucet replacement may be the better choice when the existing fixture is badly corroded, physically damaged, difficult to repair, missing replacement parts, or no longer matches the bathroom’s needs.
New bathroom faucet installation may include:
- Shutting off the water supply
- Disconnecting existing supply lines
- Removing the old faucet and mounting hardware
- Cleaning the sink or countertop surface
- Confirming the new faucet fits the existing openings
- Installing the new faucet and mounting components
- Connecting hot and cold water lines
- Installing or adjusting the drain assembly when included
- Testing faucet operation
- Checking the installation for leaks
The replacement faucet must be compatible with the sink or countertop configuration. The number and spacing of mounting holes should be confirmed before a new fixture is selected.
Bathtub Faucet Repair
A leaking bathtub faucet can waste hot water and leave stains or mineral buildup around the tub. Bathtub faucet problems may involve the handle, cartridge, stem, valve seat, diverter, spout, or internal mixing valve.
Bathtub faucet services may include:
- Dripping tub faucet repair
- Hot and cold handle repair
- Cartridge and stem replacement
- Tub spout replacement
- Tub diverter repair
- Temperature-control repair
- Loose trim and handle repair
- Bathtub valve replacement
Some bathtub valves are located behind finished walls. Access requirements should be evaluated before extensive valve replacement begins.
Shower Faucet Repair
A shower faucet may drip from the showerhead, fail to maintain temperature, become difficult to turn, or allow water to leak behind the trim. These problems may be caused by a worn cartridge, pressure-balancing component, mixing valve, seal, diverter, or connection.
Common shower faucet services include:
- Leaking shower faucet repair
- Shower cartridge replacement
- Shower valve repair
- Temperature-control repair
- Pressure-balance valve service
- Shower diverter repair
- Loose handle and trim repair
- Showerhead and arm replacement
- Complete shower faucet replacement
Sudden changes in shower temperature can indicate a pressure-balancing or mixing-valve problem that should be inspected.
Outdoor Faucet Repair
Outdoor faucet repair addresses leaking, damaged, frozen, loose, or difficult-to-operate hose bibs and exterior spigots. An outdoor faucet leak can waste water and allow moisture to enter exterior walls, crawl spaces, basements, or foundations.
Outdoor faucet services may include:
- Leaking hose bib repair
- Outdoor faucet washer replacement
- Stem and packing replacement
- Loose handle repair
- Vacuum breaker replacement
- Damaged spigot replacement
- Frost-resistant faucet repair
- Freeze-damaged pipe repair
- Interior shutoff valve service
- New outdoor faucet installation
Frozen Outdoor Faucet Repair
Water trapped inside an outdoor faucet or connected pipe can freeze, expand, and damage the plumbing. A freeze-damaged faucet may begin leaking when temperatures rise and water flow returns.
If an exterior faucet has frozen, inspect the surrounding area for water, stains, dampness, or pressure loss. A crack may be located inside the wall rather than at the visible spout.
Commercial Faucet Repair
Commercial faucets often experience frequent use and may include sensor controls, foot pedals, specialty sprayers, high-arc spouts, and heavy-duty components. Reliable faucet operation is important in restrooms, kitchens, break rooms, utility areas, and other commercial spaces.
Commercial faucet services may include:
- Restroom faucet repair
- Commercial kitchen faucet repair
- Pre-rinse sprayer repair
- Touchless faucet troubleshooting
- Sensor and solenoid repair
- Metering faucet adjustment
- Commercial cartridge replacement
- Supply line and shutoff valve repair
- Commercial faucet replacement
Touchless Faucet Repair
Touchless and motion-activated faucets use sensors, batteries, solenoids, control modules, wiring, and valves. When one component fails, the faucet may stop running, remain on, activate unpredictably, or provide weak water flow.
Touchless faucet repair may involve:
- Replacing batteries
- Cleaning or adjusting the sensor
- Checking power connections
- Testing the solenoid valve
- Cleaning the aerator
- Inspecting the control module
- Replacing damaged wiring or components
- Resetting the faucet controls
Faucet Cartridge Replacement
The cartridge controls water flow and, in many faucets, water temperature. A worn cartridge may cause dripping, handle stiffness, poor temperature control, or leaking around the handle.
Replacement cartridges must match the faucet design. Similar-looking components are not always interchangeable, and an incorrect cartridge may leak or prevent the faucet from operating properly.
Faucet Stem, Washer, and O-Ring Replacement
Compression and stem-style faucets use washers, seals, packing, stems, and valve seats to stop water flow. These parts can harden, flatten, crack, or corrode with age.
Replacing worn internal components can often restore proper operation when the faucet body remains in good condition.
Faucet Aerator Cleaning and Replacement
The aerator is attached to the end of the faucet spout. It controls the water stream and can collect mineral deposits, sediment, and debris.
A clogged aerator may cause:
- Weak water flow
- An uneven or spraying stream
- Reduced pressure at one faucet
- Visible particles in the water
- Whistling or unusual faucet noises
Cleaning or replacing the aerator may restore normal flow when the pressure problem is limited to a single faucet.
Low Water Pressure at a Faucet
Low pressure at one faucet may be caused by a clogged aerator, blocked cartridge, damaged supply line, partially closed shutoff valve, or internal faucet problem. Low pressure throughout the property may indicate a larger plumbing issue.
A plumber can compare hot and cold flow, inspect the aerator and cartridge, test shutoff valves, and check supply connections to determine where the restriction is located.
Faucet Supply Line Repair
Flexible supply lines connect the faucet to the hot and cold shutoff valves. These lines can loosen, corrode, crack, kink, or leak at their connections.
A leaking supply line should be repaired promptly because it can release water continuously beneath the sink. Replacement lines should be properly sized, routed, connected, and checked under normal water pressure.
Faucet Shutoff Valve Repair
Shutoff valves allow water to be isolated at an individual fixture. A valve may become stuck, leak around the stem, fail to stop the water completely, or corrode at the pipe connection.
Shutoff valve repair or replacement may be recommended during faucet service, especially when the water cannot be reliably isolated or the valve shows signs of leakage.
Faucet Repair or Replacement?
Many faucet problems can be corrected by replacing a cartridge, stem, washer, seal, hose, or aerator. Complete replacement may be more practical when the fixture is extensively corroded, cracked, obsolete, unreliable, or missing compatible repair parts.
Factors to consider include:
- Age and overall condition of the faucet
- Location and severity of the leak
- Availability of replacement parts
- Cost of repair compared with replacement
- Condition of the faucet body and finish
- History of previous repairs
- Compatibility with the existing sink
- Desired features and water controls
Signs You Need Faucet Repair
Schedule professional faucet service when:
- Water drips after the faucet is turned off
- Water leaks around the handle or base
- The faucet is loose or moves during use
- Water collects beneath the sink
- The handle is stiff or difficult to turn
- The faucet will not shut off completely
- Hot or cold water does not flow properly
- Water pressure becomes weak or uneven
- The faucet makes squealing or chattering noises
- The sprayer hose leaks
- The pull-down sprayer will not retract
- The faucet finish shows heavy corrosion
- An outdoor spigot leaks or appears freeze-damaged
- The shower temperature changes unexpectedly
Why Prompt Faucet Repair Matters
A small drip can become a larger leak as internal seals and valve components continue to wear. Water beneath a sink can damage cabinets, flooring, drywall, and stored belongings. Leaks inside walls or beneath countertops may remain hidden until visible damage appears.
Prompt faucet repair can:
- Stop unnecessary water waste
- Protect cabinets and countertops
- Prevent moisture damage
- Restore normal water pressure
- Improve temperature control
- Make handles and sprayers easier to use
- Reduce staining and mineral buildup
- Identify failing supply lines or shutoff valves
What Happens During Faucet Service?
- Inspect the fixture: Identify where and when the faucet leaks or malfunctions.
- Check surrounding plumbing: Examine supply lines, shutoff valves, drains, hoses, and connections.
- Identify the faucet type: Determine the internal valve or cartridge design.
- Evaluate repair options: Check the condition and availability of replacement parts.
- Complete the approved repair: Replace worn components or install a new faucet.
- Restore water service: Turn the water back on and remove trapped air.
- Test operation: Verify hot and cold water flow, handle movement, and sprayer functions.
- Check for leaks: Inspect the faucet, supply lines, drain, and shutoff connections.
Choosing a New Faucet
If replacement is recommended, the new faucet should fit the sink, countertop, plumbing connections, and intended use.
Consider the following before selecting a faucet:
- Number of mounting holes
- Distance between mounting holes
- Single-handle or two-handle operation
- Spout height and reach
- Pull-down, pull-out, or side sprayer design
- Sink depth and surrounding clearance
- Finish and cleaning requirements
- Touchless or manual operation
- Compatibility with existing supply lines
- Availability of future replacement parts
Frequently Asked Questions About Faucet Repair
Why does my faucet keep dripping after it is turned off?
A worn cartridge, stem, washer, seal, O-ring, or valve seat may allow water to pass through the closed faucet. The specific cause depends on the faucet design.
Can a leaking faucet be repaired without replacing it?
Many faucet leaks can be repaired by replacing internal components. Complete replacement may be recommended if the fixture is damaged, heavily corroded, obsolete, or difficult to repair reliably.
Why is my faucet leaking under the sink?
Water beneath a sink may come from a loose supply connection, damaged supply line, sprayer hose, faucet body, shutoff valve, drain assembly, or sink seal. The leak should be observed while the faucet is running and while it is off.
Why is my kitchen faucet loose?
The mounting nut or bracket beneath the sink may have loosened. A damaged gasket, corroded mounting component, or deteriorated sink surface can also allow movement.
Why does my faucet have low water pressure?
A clogged aerator, blocked cartridge, kinked supply line, partially closed shutoff valve, mineral buildup, or plumbing-system problem may reduce flow.
Can a plumber repair a pull-down kitchen faucet?
Yes. Depending on the problem, the plumber may repair or replace the spray head, hose, docking component, diverter, cartridge, or supply connection.
Why does my outdoor faucet leak?
A worn washer, loose packing nut, damaged stem, failed vacuum breaker, cracked faucet body, or freeze-damaged pipe may be responsible.
Should a frozen outdoor faucet be replaced?
Replacement may be required if freezing cracked the faucet body or connected pipe. The entire accessible connection should be inspected because the damage may be located inside the wall.
How do I know which replacement faucet will fit?
Check the number, diameter, and spacing of the sink or countertop mounting holes. Also consider surrounding clearance, supply connections, spout reach, and sink depth.
Does a plumber install customer-supplied faucets?
Installation policies vary. Before purchasing a faucet, confirm that it fits the existing sink and includes the necessary mounting components. Additional parts or plumbing modifications may still be required.
Can a faucet leak cause cabinet damage?
Yes. A slow leak beneath the sink can damage cabinet materials, flooring, drywall, and stored items. Moisture may also encourage odors and microbial growth.
How quickly should a leaking faucet be repaired?
A faucet should be repaired promptly when water leaks beneath the sink, around the base, inside a wall, or near materials that can be damaged. Even a small spout drip should be addressed before the internal component deteriorates further.
Request Professional Faucet Repair
Whether you need a leaky faucet fixed, a kitchen faucet repaired, a bathroom faucet replaced, or an outdoor spigot restored, professional plumbing service can identify the problem and provide the appropriate repair or replacement.
Request faucet repair service for dripping faucets, damaged cartridges, loose fixtures, leaking supply lines, low water pressure, faulty sprayers, shower valves, bathtub faucets, and outdoor hose bibs.